Introduction to CLUTCH RELEASE BEARINGS
With a long-association with the market, we have developed a range of clutch release bearings covering many vehicle manufacturers. 
Ours strict quality controls, which are in place throughout the manufacturing process, guarantee the quality of our clutch release bearings.
The technical specifications of our clutch release bearings

• Special-purpose sheet steel is used as original equipment by car manufacturers
• An angular contact bearing optimised for axial loads 
• A polyamide cage suitable for frequent operation
• A seal designed to increase service life even in a polluted environment  
• Special grease specific for the application 

Introduction to WHEEL BEARINGS
Double row roller or ball wheel bearings, composed of two interior sets housed in one outer ring, can withstand large radial and axial loads in both directions.
They allow for rigid bearing arrangements and are suitable for bearing arrangements where rigid axial guidance is required.
The double row roller/ball wheel bearing allow for space saving applications and in many cases the bearing require no maintenance since it's lubricated for life.




Introduction to WHEEL HUB BEARING ASSEMBLY
Our wheel hub bearings assembly are characterised by:

• optimisation of internal geometry and sealing
• the use of steel with a very high level of cleanliness
• the use of greases specifically developed with our suppliers

Our third generation of wheel bearings integrate hub and flange functions for a streamlined and effective assembly and precise adjustment of the pre-load.
We can provide you with robust solutions, whatever your areas of application: passenger vehicles, utilities or heavy goods vehicles.




Introduction to TRUCK BEARINGS
Heavy duty truck bearings are high loaded bearings, composed of two interior sets housed in one hub.
They are maintenance-free bearings that are greased for life, and because of their precise axial clearance, compact design, and the use of high quality grease,
these bearings ensure optimal bearing performance at high loads.
With our truck wheel bearings, quick and easy replacement in heavy vehicle wheel hubs is ensured.




Introduction to WHEEL BEARING KITS
We supply wheel bearings to most OE car manufacturers in the world and has developed bearings for automotive applications to complete its range of kits.
· Product range of over 500 kits includes three generations of wheel bearing designs.
· patented X-tracker for high performance, high load vehicles.
· All bearings are sealed for life with high performance, application-specific grease.
· Kits include any nuts, bolts, or screws necessary to carry out a complete repair.
· Fitting instructions, technical bulletins and replacement videos available to help carry out accurate and efficient repairs.
· We designs and manufactures seals to complete our bearing offer.
· Also available with OE quality ABS impulse ring and sensors for maximum braking safety.

Related Catalogues You May Concern

Shandong Huaxu Bearing Co.,Ltd 
Our factory specialize wheel hub bearing, wheel bearing kit, clutch bearing, taper roller bearing, truck bearing, wheel hub bearing in high quality.
Our bearings have large loading capacity and long lifetime, and widely fit in different vehicles.
wheel bearings and kits to vehicles like LADA, TOYOTA, HONDA, RENAULT, AUDI,Chevrolet, HYUNDAI,FIAT, FORD and so on.
Truck bearings applied to VOLVO, SCANIA, MAN, BENZ, DAF, SAF and so on.
And we can produce bearings which can meet your multifarious demands.
For example, wheel bearing, taper roller bearing, clutch release bearing, ball bearing, truck bearing ect.
We can provide brands like SKF, TIMKEN, FAG, NSK, KOYO, NTN, INA, NACHI, GMB, BW, GM, HYUNDAI ect.

Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What's the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.